新乡市宏源振动设备有限公司电话
宏源提升机 > 产品展示 > 提升机系列 >

提升机系列

[field:title function='html2text(@me)'/]

HL型环链离心斗式提升机

【产品类别】提升机系列

【性能评测】★★★★★

【产品简介】HL型环链离心斗式提升机适用于垂直输送磨琢性较大的粉状、粒状、及小块状物料,如粮食、煤、水泥、碎矿石等,输送高度最高40m。...

HL型环链离心斗式提升机产品概述

    HL型环链离心斗式提升机适用于垂直输送磨琢性较大的粉状、粒状、及小块状物料,如粮食、煤、水泥、碎矿石等,输送高度最高40m。其特点为,结构简单,运行平稳,掏取式装料,混合式或重力卸料,轮缘采用组合链轮,更换方便,链轮轮缘经特殊处理寿命长,下部如采用重力自动张紧装置,能保持恒定的张力,避免打滑或脱链,同时在料斗遇阻时,有一定的容让性能够有效地保护运动部件,物料温度不超过250℃。
Product overview
   
The HL type centrifugal bucket elevator  is suitable for vertical conveying grinding cut larger powder, granulated and small lump materials, such as grain, coal, cement, crushed ore, conveying height top 40 m.For its characteristics, simple structure, smooth operation, tao take type charging, mixed or gravity discharge, rim combined sprocket, easy to change, sprocket rim specially dealing with long service life, lower if use gravity automatic tensioning device, can keep constant tension and avoid skid or take off the chain, in the hopper blocked at the same time, has the certain let performance enough to effectively protect the moving parts, material temperature does not exceed 250 ℃.

HL型环链离心斗式提升机主要特点

   1.运行平稳、输送效率高。
    2.料斗形式多,应优先选用。
    3.适应性强、安装维修方便、寿命长。
    4.整机体积小、转速高、确保快速均匀输送。
Characteristic
1. Smooth operation, high transmission efficiency.
2. The hopper form, more should be preferable.
3. Strong adaptability, easy installation and maintenance, long service life.
4. The machine is small in size, high speed, ensure rapid delivery uniformity.


斗式提升机安装现场
Installation Site

斗式提升机图片

Photo

斗式提升机斗式提升机
斗式提升机

HL型环链离心斗式提升机工作原理

    我公司生产的HL型环链离心斗式提升机由运动部分(料斗与牵引链条)、带有传动链轮的上部区段、带有拉紧轮的下部区段、中间机壳、驱动装置、逆止制动装置等组成(见下图)。本提升机的料斗为间断式布置,利用“掏取法”进行装载,“离心投料法”卸料。本提升机的牵引机构是两根环形链条。
Working principles
   
Our company produces the HL type centrifugal bucket elevator chain by moving parts (hopper and traction chain), with the upper section of the sprocket, with the bottom of the tensioning wheel section, intermediate casing, driving device, non-return braking device, etc (see below).The hoist hopper for layout, intermittent loading by determining the "tao", the "centrifugal feeding method" discharge.This elevator traction institutions are two circular chain.

TH型环链斗式提升机链条结构图

Structure

 

HL型环链离心斗式提升机制法和装法

    1、按料斗形状分为两种:S制法--带有深圆底形料斗;Q制法--带有浅圆底形料斗。
    2、按上部区段卸料口的形式分为两种:X1 制法--带有倾斜法兰的卸料口;X2 制法--带有水平法兰的卸料口。
    3、按下部区段进料口的形式分为两种:J1 制法--进料口的斜面与水平面成45度角;J2 制法--进料口的斜面与水平面成60度角。
    4、按中间机壳侧面检视门的位置分为四种:K1 制法--中间机壳侧面带有下端左检视门;K2 制法--中间机壳侧面带有下端右检视门;K3 制法--中间机壳侧面带有上端左检视门;K4 制法--中间机壳侧面带有上端右检视门。
    5、按中间机壳端面检视门的位置分为两种:Z1 制法--中间机壳端面带有下端检视门;Z2 制法--中间机壳端面带有上端检视门。
    6、按传动装置对提升机的相对位置分为两种:左装--传动装置在左侧;右装--传动装置在右侧。
Manufacture and installation method
 1, according to the shape of hopper is divided into two kinds: S method -- with a deep round bottom shaped hopper;The method of Q - with shallow round bottom shaped hopper.
2, according to the upper section of the form of a discharge outlet can be divided into two kinds: X1 fashion - with the discharging mouth of the inclined flange;Method the X2 - with horizontal discharge outlet flange.
3, according to the form of lower section inlet can be divided into two kinds: J1 program - inlet of inclined plane and horizontal plane Angle of 45 degrees;J2 method - inlet of inclined plane and horizontal plane into 60 degree Angle.
4, according to the intermediate casing side view of the position of the door is divided into four kinds: K1 process - intermediate casing with the bottom left side view door;K2 method -- intermediate casing with the bottom right side view door;K3 method -- intermediate casing with the upper left side view door;K4 method - intermediate casing with the top right side to check door.
5, according to the intermediate casing end view of the position of the door is divided into two kinds: - Z1 know-how for the intermediate casing end with a bottom view door;Method Z2 - intermediate casing end face with top view door.
6, according to the transmission of the relative position of hoist is divided into two kinds: left - transmission device on the left side;Right - transmission device on the right side.
 

HL型环链离心斗式提升机技术参数表

Parameters
项 目
提升 机 型号
HL300 HL400
S制法
Q制法
S制法
Q制法
输送能力,平方米/小时
28 16
47.2
30
料斗容量,升
5.2 4.4 10.5 10
斗距,毫米
500
500
600 600
运行部分(料斗牵引链条)
公斤/米
24.8
24
29.2
28.3
牵引链条
型式
锻造环形链
圆钢直径(毫米) 18 18
节距(毫米) 50 50
破断强度(公斤) 12800 12800
料斗运动速度(米/秒)
1.25
1.25
传动链条轴转数(转/分)
37.5
37.5
输送物料的散状比重
H,米
N,千瓦
H,米
N,千瓦
H,米
N,千瓦
H,米
N,千瓦
0.8
59 6.35 64 4.36 30 7 33 6.3
1.0
52 7.55 60 5.12 27 7.6 30 7
1.25
41 8.7 49 5.3 23 8 26 7.6
1.6
31 9.7 39 5.3 18.5 8.4 22 8.2
2.0
24 9.7 29 5.35 15 8.6 18 8.4
传动装置制法 C1 C2 C3 C4 C1 C2
圆柱齿轮减速机 传动装置右装 JZQ400—IV—3U JZQ400—IV—3U
传动装置左装 JZQ400—IV—4Y JZQ400—IV—4Y
电动机型号 Y132M2—6 Y160M—6 Y160L—6 Y160M—6 Y160L—6
传动装置功率(千瓦) 5.5 7.5 7.5 7.5 7.5 7.5
棘轮制动装置(齿轮X模数) 6X18 6X18 8X15 8X15 6X18 8X15
传动装置重量(公斤) 628 702 870 885 902 917
物料的最大块度(毫米)
25
35
45
55

上一篇:没有了
下一篇:NE系列板链斗式提升机
相关产品
产品类别
PRODUCT CATEGORIES
更多热销产品
联系方式
  • 新乡市宏源振动设备有限公司
  • 联系人:闫经理
  • 18803897720
  • 0373-2678112
  • 7091700@qq.com
  • 新乡市宏力大道西冀场工业园
点击这里给我发消息